Skip To Content
Helix Logo

Print Page

HSD-415M - Stepper Motor Drive

  • Extremely cost-effective
  • Good high speed performance
  • Supply voltage up to +40 VDC
  • Output current up to 1.5A
  • 7 selectable microstep resolutions: 1, 2, 4, 8, 16, 32, 64
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Protection against power leads(+, -)reversal
  • Small size: 86*55*20mm (3.386*2.165*0.787Inch)

Product HSD-415M - Stepper Motor Drive
Product Specifications
Model: HSD-415
Phase: 2
Control Mode: Step & Direction
Max Input Frequency: 20KHz
Input Voltage Range: 18 - 40 VDC
Suggested Power Supply Voltage Range: 24-36 VDC
Output Current: 0.21 - 1.50 A
# of DIP Switch Resolution Configurations: 7
DIP Switch Resolution Setings: 200, 400, 800, 1600, 3200, 6400, 12800
# of DIP Switch Current Configurations: 7
Logic Current Range: 7-16mA      (10mA typical)
Logic Voltage Range: 2.5-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low
Pulse enabled at: Rising edge
Idle Current Percentage: 60%
# of Digital Inputs: 3
Step Width: 1,500 ns
Minimal Direction Setup Time: 5,000 ns
Isolation Resistance: 500M Ohm
Environment: Avoid dust, oil fog and corrosive gases
Ambient Temperature: 0-50°C
Humidity: 40–95% RH
Operating Temperature: 0-70°C
Vibration: 5.9 m/s2 Max
Storage Temperature: -20-65°C
Dimensions 3.39 X 2.17 X 0.79 Inches
Weight: 0.25 lb
Request a QuoteRequest a Prototype

Helix Linear Blog

Tweets from HelixLinear