Skip To Content
Helix Logo

Print Page

HSD-856 - Stepper Motor Drive

  • Extra-low motor noise
  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Self-test and Auto-configuration technology, offers optimum responses with different motors
  • Microstep resolutions programmable, from full-step to 102,400 steps/rev 
  • Supply voltage up to +80 VDC 
  • Output current programmable, from 0.5A to 5.6A
  • Pulse input frequency up to 200 KHz 
  • Automatic idle-current reduction
  • Supports PUL/DIR and CW/CCW modes

Product HSD-856 - Stepper Motor Drive
Product Specifications
Model: HSD-856
Phase: 2
Control Mode: Step & Direction
Max Input Frequency: 200KHz
Input Voltage Range: 20 - 80 VDC
Suggested Power Supply Voltage Range: 24-72 VDC
Output Current: 2.10 - 5.60 A
# of DIP Switch Resolution Configurations: 16
DIP Switch Resolution Setings: 200, 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
# of DIP Switch Current Configurations: 7
Logic Current Range: 7-16mA      (10mA typical)
Logic Voltage Range: 7-16mA      (10mA typical)
Pulse enabled at: Rising edge
Idle Current Percentage: 50%
# of Digital Inputs: 3
Step Width: 2,500 ns
Minimal Direction Setup Time: 5,000 ns
Isolation Resistance: 500M Ohm
Environment: Avoid dust, oil fog and corrosive gases
Ambient Temperature: 0-50°C
Humidity: 40–95% RH
Operating Temperature: 0-70°C
Vibration: 5.9 m/s2 Max
Storage Temperature: -20-65°C
Dimensions 4.65 X 2.97 X 1.30 Inches
Weight: 4.65 X 2.97 X 1.30 Inches
Request a QuoteRequest a Prototype

Helix Linear Blog

Tweets from HelixLinear